This is the preorder Lost El Patron, the board for bigger guys who still want to shred on a shortboard. Just choose from the options below and get in touch with any extras like glassing spec or artwork. The options include carbon stringer, choose custom to have your own tweak or have your board as standard PU.

Here's what Lost say about it;

El Patron’ is primarily based off of a couple higher volume (wider/thicker) quivers built for Kolohe Andino, where he demanded they “still carve and turn like a thinner board”. Featuring a very conservative, low entry rocker and generous, accelerated tail rocker, but blended with a no concave nose area to the shallowest of a single concave, fading to a slight vee through the fins, and back to flat out the tail.  This bottom contour allows effortless drive, and glide, while importantly negating the high volume, and lets the rail easily engage and roll into the water.  3D surfing on a thick, wide board. Less concave/More volume: This is the “magic” of El Patron’.  Because El Patron’ is designed thick, we employ another trick…a 1/3 thinner stringer!  By using a 2ply stringer, instead of 3ply, we retain similar flex patterns of a thinner board. This keeps El Patron’ feeling flexy and forgiving, rather than being a big stiff plank…and breakage is not much of an issue with a board up and over 2.75″ thick.

Other details include:

• Heavily blended rails, that belie the overall thickness, and feel really good in your hands, and in the water.
• Thin, boxy rails from the fins back through the tail, allowing control and feeling loose.
• Forward thickness flow, for drive and extreme paddle-ability.

Dimensions

• 6’0 X 20 X 2.75 X 35L
• 6’1 X 20.13 X 2.75 X 36L
• 6’2 X 20.25 X 2.80 X 37.50L
• 6’3 X 20.38 X 2.88 X 39.50L
• 6’4 X 20.63 X 2.90 X 40.50L
• 6’5 X 20.88 X 2.90 X 41.50L
• 6’6 X 21 X 2.94 X 42.50L
• 6’8 X 21.25 X 2.94 X 45L